1993-95 5-7" Chevy K2500/K3500 Pickup Lift Kit (8 Lug, 3 Bolt Id

Be the first to review this product

this part qualifies for free shipping
First introduced in 1988, these lifts are still known as the GM systems to have. Four to six inches of lift is available for 1/2 and light duty 3/4-tons (6-lug wheels).

Lowering the factory upper and lower control arms in relation to the frame brings ride height up. By keeping the factory control arms and torsion bars, we are able to retain stock alignment geometry and ride quality. Note that this system has a two-inch height range (4" to 6"). Front vehicle height is determined by torsion bar adjustment; the rear is lifted 4" to keep the truck level.

The front differential assembly is also lowered to keep CV axle angles in check. This is accomplished by using two, one-piece tubular cross members that span from frame rail-to-frame rail. Superlift's new control arm brackets tie into these cross members along with "kicker" braces to form an exceptionally strong assembly.

The truck steers via a new "dropped" center-link that keeps the tie rods in phase with the lower control arms. Two greasable stabilizing links regulate center-link movement and reduce the load and stress transmitted to the pitman and idler arms.

Superlift's lift method does not increase front track width or require the front differential housing to be trimmed, as is the case with most replacement knuckle systems.

This kit includes:

  • Driver/Pass upper control arm front leg bracket
  • Front/Rear Superlift Superide shocks with boots
  • Upper control arm front leg x-member
  • Lower control arm rear leg x-member
  • Driver/Pass side kicker brace
  • Center link stabilizer system (CSS) x-member
  • Driver/Pass side CSS link
  • Drivers side upper/lower control arm rear leg bracket
  • Passengers side upper/lower control arm rear leg bracket
  • Pair low profile compression stops
  • Skid plate
  • Driver/Pass side lower control arm front leg bracket
  • Torsion bar x-member drop down brackets
  • Center link
  • 2-bolt idler arm spacer
  • Extended length rubber brake hoses
  • Rear lift block kit
This kit fits 1993-98 4WD K2500 3/4 ton and K3500 non dually 1 ton Chevy/GM trucks with 6-lug wheels and 3-bolt idler arm.
Part Number: SL-K273
$1,994.79
Superlift

Get the best shipping prices today.

Call 1 (800) 954-0065 with any questions on this part.

Description

Details

First introduced in 1988, these lifts are still known as the GM systems to have. Four to six inches of lift is available for 1/2 and light duty 3/4-tons (6-lug wheels).

Lowering the factory upper and lower control arms in relation to the frame brings ride height up. By keeping the factory control arms and torsion bars, we are able to retain stock alignment geometry and ride quality. Note that this system has a two-inch height range (4" to 6"). Front vehicle height is determined by torsion bar adjustment; the rear is lifted 4" to keep the truck level.

The front differential assembly is also lowered to keep CV axle angles in check. This is accomplished by using two, one-piece tubular cross members that span from frame rail-to-frame rail. Superlift's new control arm brackets tie into these cross members along with "kicker" braces to form an exceptionally strong assembly.

The truck steers via a new "dropped" center-link that keeps the tie rods in phase with the lower control arms. Two greasable stabilizing links regulate center-link movement and reduce the load and stress transmitted to the pitman and idler arms.

Superlift's lift method does not increase front track width or require the front differential housing to be trimmed, as is the case with most replacement knuckle systems.

This kit includes:

  • Driver/Pass upper control arm front leg bracket
  • Front/Rear Superlift Superide shocks with boots
  • Upper control arm front leg x-member
  • Lower control arm rear leg x-member
  • Driver/Pass side kicker brace
  • Center link stabilizer system (CSS) x-member
  • Driver/Pass side CSS link
  • Drivers side upper/lower control arm rear leg bracket
  • Passengers side upper/lower control arm rear leg bracket
  • Pair low profile compression stops
  • Skid plate
  • Driver/Pass side lower control arm front leg bracket
  • Torsion bar x-member drop down brackets
  • Center link
  • 2-bolt idler arm spacer
  • Extended length rubber brake hoses
  • Rear lift block kit
This kit fits 1993-98 4WD K2500 3/4 ton and K3500 non dually 1 ton Chevy/GM trucks with 6-lug wheels and 3-bolt idler arm.

Reviews

Write Your Own Review

You're reviewing: 1993-95 5-7" Chevy K2500/K3500 Pickup Lift Kit (8 Lug, 3 Bolt Id

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Overall