Pump Assembly Ford Duratec V6 2.5L/ 3.0L 93-12 High Flow Billet Gear Boundary Pumps

The Boundary Ford Duratec Oil Pump Assembly uses our proprietary race prepared housing which is fitted with our custom Billet Oil Pump Gears. We use our proprietary gerotor profile to produce 30 percent more volume and safely deliver it at up-to 9000 RPM and over 800WHP.

All assembled billet pumps undergo the following:

• Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.
• Pump is hand de-burred.
• Gear set is cut in house and features our ColdFlow surfaces and high quenched and tempered chromoly cores.
• Stainless Torx heads replace the OEM mild steel fasteners
• All fasteners are torqued to spec
• Loctite applied to fasteners to prevent back out or loosening
• Anaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.
• Assembly lubricant applied to all critical surfaces to insure fast initial pump up and lubricity on start.
• Parts are blue printed and issued with specification sheet.